Viewing Route Directions; Navigating With Sight 'N Go; Marking And Starting Navigation To A Man Overboard Location; Stopping Navigation - Garmin MARQ ADVENTURER GEN 2 Owner's Manual

Viewing Route Directions

You can view a list of turn-by-turn directions for your route.
1 While navigating a route, hold MENU.
2 Select Turn By Turn.
A list of turn-by-turn directions appears.
3 Press DOWN to view additional directions.

Navigating with Sight 'N Go

You can point the device at an object in the distance, such as a water tower, lock in the direction, and then
navigate to the object.
1 From the watch face, press START.
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Sight 'N Go.
5 Point the top of the watch at an object, and press START.
Navigation information appears.
6 Press START to begin navigation.

Marking and Starting Navigation to a Man Overboard Location

You can save a man overboard (MOB) location, and automatically start navigation back to it.
TIP: You can customize the hold function of the keys to access the MOB function
page 113).
1 From the watch face, press START.
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Last MOB.
Navigation information appears.

Stopping Navigation

1 During an activity, hold MENU.
2 Select Stop Navigation.

Courses

You can send a course from your Garmin Connect account to your device. After it is saved to your device, you
can navigate the course on your device.
You can follow a saved course simply because it is a good route. For example, you can save and follow a bike
friendly commute to work.
You can also follow a saved course, trying to match or exceed previously set performance goals. For example,
if the original course was completed in 30 minutes, you can race against a Virtual Partner trying to complete the
course in under 30 minutes.
106
(Customizing the Hot Keys,
Navigation