Table of Contents
Advertisement
3 Wait while the device connects to your VIRB
camera.
When the camera is connected, a VIRB data screen
is automatically added to the activity apps.
4 During an activity, select UP or DOWN to view the
VIRB data screen.
5 Hold MENU.
6 Select VIRB Remote�
7 Select an option:
• To control the camera using the activity timer,
select Settings > Timer Start/Stop�
NOTE: Video recording automatically starts and
stops when you start and stop an activity.
• To control the camera using the menu options,
select Settings > Manual�
• To manually record video, select Start
Recording�
The video counter appears on the D2 screen.
• To take a photo while recording video, select
DOWN.
• To manually stop recording video, select
• To take a photo, select Take Photo�
Using the Stress Level Widget
The stress level widget displays your current stress
level and a graph of your stress level for the last
several hours. It can also guide you through a
breathing activity to help you relax.
1 While you are sitting or inactive, select UP or
DOWN to view the stress level widget.
TIP: If you are too active for the watch to
determine your stress level, a message appears
instead of a stress level number. You can check
your stress level again after several minutes of
inactivity.
2 Select
to view a graph of your stress level for
the last four hours.
Blue bars indicate periods of rest. Yellow bars
indicate periods of stress. Gray bars indicate times
that you were too active to determine your stress
level.
3 To start a breathing activity, select DOWN >
and enter a duration for the breathing activity in
minutes.
Customizing the Controls Menu
You can add, remove, and change the order of the
shortcut menu options in the controls menu
the Controls Menu,
page 1).
1 Hold MENU.
2 Select Settings > Controls�
3 Select a shortcut to customize.
4 Select an option:
• Select Reorder to change the location of the
shortcut in the controls menu.
• Select Remove to remove the shortcut from the
Customizing Your Device
controls menu.
5 If necessary, select Add New to add an additional
shortcut to the controls menu.
Watch Face Settings
You can customize the appearance of the watch face
by selecting the layout, colors, and additional data.
You can also download custom watch faces from the
Connect IQ store.
Default Watch Face
Coordinated Universal Time (UTC).
1
.
Alternate time zone pointer. References the 24-
hour time markings on the watch, in up to four
2
alternate time zones
Zones,
UTC hand. References the 24-hour time
3
markings on the watch.
Customizing the Watch Face
Before you can activate a Connect IQ watch face, you
must install a watch face from the Connect IQ store
(Connect IQ Features,
You can customize the watch face information and
appearance, or activate an installed Connect IQ watch
face.
1 From the watch face, hold MENU.
2 Select Watch Face�
3 Select UP or DOWN to preview the watch face
options.
4 Select Add New to scroll through additional pre-
loaded watch faces.
,
5 Select
face or an installed Connect IQ watch face.
6 If using a pre-loaded watch face, select
Customize�
7 Select an option:
• To change the style of the numbers for the
(Viewing
analog watch face, select Dial.
• To change the style of the hands for the analog
watch face, select Hands.
• To add the plane's tail number to the aviation-
specific analog watch face, select Tail Number�
• To change the style of the numbers for the
digital watch face, select Layout
• To change the style of the seconds for the
digital watch face, select Seconds.
(Adding Alternate Time
page 31).
page 13).
> Apply to activate a pre-loaded watch
>
41
Advertisement
Table of Contents
