Audio; Audio Mode - Mitel 6920 User Manual

C
USTOMIZING YOUR PHONE
: Do not change the audio device when you run the audio diagnostics tool.
CAUTION

Audio

The Audio option on the IP phone allows you to set the audio mode for your IP phone, configure headset
settings, and personalize ring tones and tone sets.

Audio Mode

The 6920 allows you to use a handset, a headset, or handsfree mode to handle incoming and outgoing
calls. The Audio Mode option provides different combinations of these three methods to provide
maximum flexibility in handling calls. There are four audio mode options you can set:
Audio Mode Option
Speaker
Headset
Speaker/Headset
Headset/Speaker
Description
This is the default setting. Calls can be made or
received using the handset or handsfree
speakerphone. In handset audio mode, pressing
the button on the phone switches to
handsfree speakerphone. In Speaker audio
mode, lift the handset to switch to the handset.
Choose this setting if you want to make or receive
all calls using a handset or headset. Calls can be
switched from the handset to headset by pressing
the button on the phone. To switch from
the headset to the handset, lift the handset.
Incoming calls are sent to the handsfree
speakerphone first when the
pressed. By pressing the button again, you can
switch back and forth between the handsfree
speakerphone and the headset. At anytime, lifting
the handset switches back to the handset from
either the handsfree speakerphone or the
headset.
Incoming calls are sent to the headset first when
the button is pressed. By pressing the
button again, you can switch back and forth
between the headset and the handsfree
speakerphone. At anytime, lifting the handset
switches back to the handset from either the
headset or the handsfree speakerphon
A
UDIO
button is
52