Configuring Park/Pickup Keys Using The Mitel Web Ui - Mitel 6920 User Manual

C S
ONFIGURING OFTKEYS
Administrators can configure the Park and Pickup keys for any line using the configuration files or the
Mitel Web UI.
Users can make changes to customize the label of the Park and Pickup keys using the Web UI.

Configuring Park/Pickup Keys Using the Mitel Web UI

Click on Operation > Softkeys and XML. or Click on Operation > Expansion Module <N>.
1.
Softkeys
Select from Key 1 through Key 20 on the Top keys.orSelect from Key 1 through Key 18 on the Bottom
2.
keys.
In the Type field, select Park.
3.
In the Label field, enter a label for the Park softkey.
4.
: The Value and Line fields are configured by the Administrator.
NOTE
In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
5.
Select from Key 1 through Key 20.
6.
In the Type field, select Pickup.
7.
In the Label field, enter a label for the Pickup softkey.
8.
: The Value and Line fields are configured by the Administrator.
NOTE
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
9.
Click Save Settings.
10.
Click on Reset, then click Restart to restart the IP phone and apply the changes.
11.
Expansion Module Keys
Select from Key 1 through Key 84(M695).
12.
In the Type field, select Park.
13.
In the Value field, enter the appropriate value for accessing specific services from the server.
14.
: The Value and Line fields are configured by the Administrator.
NOTE
Select from Key 1 through Key 84(M695).
15.
In the Type field, select Pickup.
16.
In the Value field, enter the appropriate value for accessing specific services from the server.
17.
P /P K
ARK ICKUP EYS
86