Configuring The Audio Properties - Mitel 6865 SIP User Manual

Configuring the audio properties

This section explains how to set audio properties.
Adjusting the volume
You want to change the volume of the ring tone or the handset during a
call.
Ring volume: You can adjust the volume in the idle state or when the ring
tone sounds. Press and hold the volume down button to switch off the ring
tone completely.
Handset volume: You need to set the volume of handset and loudspeaker
separately. The new handset volume will remain saved even after the call
is ended.
Adjusting the volume (in idle state, during ringing phase/call):
Quieter: Press the
Louder: Press the
Setting the ringing properties
You want to change the way in which your phone rings.
Available settings:
Ring tones
Ring tones
• Ring tone 1...15
• Silent
Tone set
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/2.0 – R6.0 – 06.2018
key.
key.
Description
Selection of available ring melodies.
If you do not want to be disturbed during a certain time,
you can set your phone not to ring with Suppress ring
tone.
Country-specific ring tone settings. This menu is set by
your system administrator.
Personalizing your phone
75