Mitel 6920 User Manual page 114

Hide thumbs Also See for 6920:
Table of Contents

Advertisement

C
S
ONFIGURING
OFTKEYS
Softkeys
Select from Key 1 through Key 20 on the Top keys.
2.
or
Select from Key 1 through Key 18 on the Bottom keys.
In the Type field, select Paging.
3.
In the Label field, enter a label to apply to this key.
4.
In the Value field, enter a multicast IP address and a port number for the Paging key. When you press
5.
this key, the phone initiates an outgoing multicast RTP session to the specified address using the
specified port (e.g. 239.0.1.15:10000).
:
NOTE
When you select Paging for the Type field, the Line field is disabled.
a.
The Value field allows for one multicast address entry only.
b.
To receive RTP steams for group paging, you must also configure the Paging Listen Addresses
6.
parameter at the path, Basic Settings > Preferences > Group Paging RTP Settings.
Expansion Module Keys
Select from Key 1 through Key 84(M695).
7.
In the Type field, select Paging.
8.
In the Value field, enter a multicast IP address and a port number for the Paging key. When you press
9.
this key, the phone initiates an outgoing multicast RTP session to the specified address using the
specified port. (For example, 239.0.1.15:10000).
:
NOTE
When you select Paging for the Type field, the Line field is disabled.
a.
The Value field allows for one multicast address entry only.
b.
To receive RTP steams for group paging, you must also configure the Paging Listen Addresses
10.
parameter at the path, Basic Settings > Preferences > Group Paging RTP Settings.
Click Save Settings to save your changes.
11.
P
K
AGING
EY
104

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents