Mitel 6920 User Manual page 104

Hide thumbs Also See for 6920:
Table of Contents

Advertisement

C
S
ONFIGURING
OFTKEYS
Softkeys
Select from Key 1 through Key 20 on the Top keys.
2.
In the Type field, select Speed Dial/MWI.
3.
In the Label field, enter a label to apply to this key. When messages are pending, the phone UI will
4.
display the number of pending messages and the defined label.
In the Value field, enter call URI and voicemail URI separated by a semi-colon, as per the following
5.
syntax: [call URI];[voicemail URI]. For example, +33123456,,,3456#0000#@domain;sip:voicemail_-
peter@domain.
:
NOTE
As the example above illustrates, pauses and DTMF are supported for the call URI.
a.
Ensure that no spaces are added between the call URI and the voicemail URI when defining the
b.
key value.
If only one URI is provided, the value will be used for the voicemail URI and the call URI will be
c.
left as undefined.
In the Line field, select the line for which you want to use the key functionality.Valid values are:
6.
global
1 through 24
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
7.
Expansion Module Keys
Select from Key 1 through Key 84(M695).
8.
In the Type field, select Speed Dial/MWI.
9.
In the Label field, enter a label to apply to this key. When messages are pending, the phone UI will
10.
display the number of pending messages and the defined label.
In the Value field, enter call URI and voicemail URI separated by a semi-colon, as per the following
11.
syntax: [call URI];[voicemail URI]. For example, +33123456,,,3456#0000#@domain;sip:voicemail_-
peter@domain.
:
NOTE
As the example above illustrates, pauses and DTMF are supported for the call URI.
a.
Ensure that no spaces are added between the call URI and the voicemail URI when defining the
b.
key value.
S
D
/MWI
PEED
IAL
94

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents