Ace Configuration - Planet Networking & Communication GS-6320 Series User Manual

Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page; any changes made locally will be undone.
: Click to clear the counters.
: Click to remove all ACEs.

4.6.5.3 ACE Configuration

Configure an ACE (Access Control Entry) on this page. An ACE consists of several parameters. These parameters vary
according to the frame type that you select. First select the ingress port for the ACE, and then select the frame type. Different
parameter options are displayed depending on the frame type selected. A frame that hits this ACE matches the configuration
that is defined here. The ACE Configuration screen in
The page includes the following fields:
Object
•
Ingress Port
• Policy Filter
User's Manual of GS-6320 and MGS-6320 Managed Switches
Figure 4-6-5-3
Figure 4-6-5-3: ACE Configuration Page Screenshot
Description
Select the ingress port for which this ACE applies.
■
Any: The ACE applies to any port.
■
Port n: The ACE applies to this port number, where n is the number of the
switch port.
Specify the policy number filter for this ACE.
■
Any: No policy filter is specified. (policy filter status is "don't-care".)
appears.
382