Acl Ports Configuration - Planet Networking & Communication GS-6320 Series User Manual

Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Return to the previous page.

4.6.5.4 ACL Ports Configuration

Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port unless the
frame matches a specific ACE. The ACL Ports Configuration screen in
The page includes the following fields:
Object
•
Port
•
Policy ID
•
Action
•
Rate Limiter ID
• Port Redirect
• Mirror
User's Manual of GS-6320 and MGS-6320 Managed Switches
Figure 4-6-5-4: ACL Ports Configuration Page Screenshot
Description
The logical port for the settings contained in the same row.
Select the policy to apply to this port. The allowed values are 0 through 255.
The default value is 0.
Select whether forwarding is permitted ("Permit") or denied ("Deny").
The default value is "Permit".
Select which rate limiter to apply on this port. The allowed values are Disabled or
the values 1 through 16.
The default value is "Disabled".
Select which port frames are redirected on. The allowed values are Disabled or a
specific port number and it can't be set when action is permitted. The default
value is "Disabled".
Specify the mirror operation of this port. The allowed values are:
392
Figure 4-6-5-4 appears.