Table of Contents
Advertisement
User's Manual of GS-6320 and MGS-6320 Managed Switches
4.10.5 Configure Activate
Thje Configure Activate page allows to activate the startup-config and default-config files present on the switch. Please refer to
the Figure
4-10-5
shown below.
Figure 4-10-5: Configuration Activate Page Screenshot
It is possible to activate any of the configuration files present on the switch, except for running-config which represents the
currently active configuration.
Select the file to activate and click
. This will initiate the process of completely replacing the existing
configuration with that of the selected file.
4.10.6 Configure Delete
The Configure Delete page allows to delete the startup-config and default-config files which are stored in FLASH. If this is done
and the switch is rebooted without a prior Save operation, this effectively resets the switch to default configuration. Please refer
to the Figure
4-10-6
shown below.
Figure 4-10-6: Configuration Delete Page Screenshot
448
Advertisement
Table of Contents
