System Configuration - Planet Networking & Communication GS-6320 Series User Manual

SNMP community. It will not respond to requests from management stations that do not belong to one of its communities.
SNMP default communities are:
。
Write = private
。
Read = public
Use the SNMP Menu to display or configure the Managed Switch's SNMP function. This section has the following items:


System Configuration


System Information

SNMP Trap Configuration

SNMPv3 Communities

SNMPv3 Users

SNMPv3 Groups

SNMPv3 Views

SNMPv3 Access
4.2.2.2 System Configuration
Configure SNMP on this page. The SNMP System Configuration screen in
The page includes the following fields:
Object
•
Mode
•
Engine ID
Buttons
: Click to apply changes
User's Manual of GS-6320 and MGS-6320 Managed Switches
Configure SNMP on this page.
The system information is provided here.
Configure SNMP trap on this page.
Configure SNMPv3 communities table on this page.
Configure SNMPv3 users table on this page.
Configure SNMPv3 groups table on this page.
Configure SNMPv3 views table on this page.
Configure SNMPv3 accesses table on this page.
Figure 4-2-2-2: SNMP System Configuration Page Screenshot
Description
Indicates the SNMP mode operation. Possible modes are:

Enabled: Enable SNMP mode operation.

Disabled: Disable SNMP mode operation.
Indicates the SNMPv3 engine ID. The string must contain an even number
between 10 and 64 hexadecimal digits, but all-zeros and all-'F's are not allowed.
Change of the Engine ID will clear all original local users.
Figure 4-2-2-2
75
appears.