4.5.6 Voice VLAN
4.5.6.1 Voice VLAN Configuration
The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, then the switch can classify and schedule network
traffic. It is recommended that there be two VLANs on a port - one for voice, one for data.
Before connecting the IP device to the switch, the IP phone should configure the voice VLAN ID correctly. It should be
configured through its own GUI. The Voice VLAN Configuration screen in
The page includes the following fields:
Object
• Mode
User's Manual of GS-6320 and MGS-6320 Managed Switches
Figure 4-5-6-1: Voice VLAN Configuration Page Screenshot
Description
Indicates the Voice VLAN mode operation. We must disable MSTP feature
before we enable Voice VLAN. It can avoid the conflict of ingress filter. Possible
modes are:
■
Enabled: Enable Voice VLAN mode operation.
Figure 4-5-6-1
appears.
334