4.5.1.1 Port Classification
This page allows you to configure the basic QoS Classification settings for all switch ports. The Port classification screen in
Figure 4-5-1-1
appears.
The page includes the following fields:
Object
•
Port
•
CoS
• DPL
• PCP
User's Manual of GS-6320 and MGS-6320 Managed Switches
Figure 4-5-1-1: QoS Ingress Port Policers Page Screenshot
Description
The port number for which the configuration below applies.
Controls the default
CoS
All frames are classified to a CoS. There is a one to one mapping between CoS,
queue and priority. A CoS of 0 (zero) has the lowest priority.
The classified CoS can be overruled by a QCL entry.
Note: If the default CoS has been dynamically changed, then the actual default
CoS is shown in parentheses after the configured default CoS.
Controls the default
DPL
All frames are classified to a Drop Precedence Level.
The classified DPL can be overruled by a QCL entry.
Controls the default
PCP
value.
value.
value.
314