4.3.2 IP Configuration
This section provides the IP Configuration of Ultra PoE Managed Injector Hub as the screen in
4-3-2
describes the IP Configuration object of Ultra PoE Managed Injector Hub.
Object
DHCP Client
IP Address
Subnet Mask
Default Gateway
Apply
Reset
If Ultra PoE Managed Injector Hub has not received IP address from DHCP server, then user still can
connect to the IP address before changing to DHCP client mode, or user can use Smart Discovery Utility to
find out what IP address set in the Ultra PoE Managed Injector Hub is currently.
Figure 4-3-2: IP Configuration Web Page Screen
Description
Allows to disable or enable the DHCP Client function of Ultra PoE Managed
Injector Hub.
Allows to input new IP Address of Ultra PoE Managed Injector Hub.
Allows to input new Subnet Mask Address of Ultra PoE Managed Injector Hub.
Allows to input new Default Gateway Address of Ultra PoE Managed Injector Hub.
Press this button to take effect.
Press this button to reset IP Configuration to default mode.
Table 4-3-2: Descriptions of the IP Configuration Objects Screen
User's Manual of UPOE-800G / UPOE-1600G
31
Figure 4-3-2
appears.
Table