Advertisement
Contents
Connections
Adjusting the volume
1
Use VOLUME df to adjust the volume.
0 The variable range differs according to the input signal and channel level setting.
0 You can also adjust the master volume by turning MASTER VOLUME on the main
unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE :.
MUTE indicator on the display flashes.
0
h appears on the TV screen.
0
0 The sound is reduced to the level set at "Mute Level" in the menu. (v p. 194)
0 To cancel mute, either adjust the sound volume or press MUTE : again.
0 If h is displayed on the TV screen for more than 5 minutes when the "Screen
Saver" is set to "On", the h symbol moves randomly over the TV screen.
(v p. 207)
Front panel
Display
Playback
Settings
Playback a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/DVD
player.
1
Prepare for playback.
A Turn on the power of the TV, subwoofer and player.
B Change the TV input to the input of this unit.
2
Press POWER X to turn on power to the unit.
3
Press Blu-ray or DVD to switch an input source for a
player used for playback.
4
Play the Blu-ray Disc player or DVD player.
o Surround playback (v p. 141)
91
Rear panel
Tips
Remote
Index
Appendix
Advertisement
