Advertisement
Contents
Connections
o Subwoofer Mode
When you are using multiple subwoofers, set the audio to be output
from the subwoofer.
Standard
(Default):
Directional:
0 This can be set when "Subwoofers" is set to "4 spkrs", "3 spkrs" or "2 spkrs".
Front panel
Display
Playback
All subwoofers output LFE signals and
bass below the crossover frequency of all
the speakers.
All subwoofers output LFE signals. In
addition, each subwoofer outputs bass
below the crossover frequency of
speakers that are placed near them.
Rear panel
Settings
o Subwoofer Layout
When you are using multiple subwoofers, configure the subwoofer
layout. The layouts that can be selected differ depending on the
configuration of "Subwoofer Mode".
[When "Subwoofers" is set to "2 spkrs"]
Left/Right
(Default):
Front/Rear:
[When "Subwoofers" is set to "3 spkrs"]
FL/FR/Rear:
[When "Subwoofers" is set to "4 spkrs"]
FL/FR/RL/RR:
236
Remote
Tips
Appendix
Place subwoofers symmetrically on the
front side.
Place a subwoofer in the middle of the
front side and another in the middle of the
rear side.
Place subwoofers symmetrically on the
front side and one in the middle of the
rear side.
Place the subwoofers in the four corners
of the room.
Index
Advertisement
