Advertisement
Contents
Connections
3
Connect the Sound calibration microphone to the
SETUP MIC jack of this unit.
When the Sound calibration microphone is
connected, the following screen is displayed.
Audyssey Setup
Your AVR can automatically measure the acoustics of your
room then optimize your speakers using the included
microphone and microphone stand.
Set the following items if necessary.
Speaker Layout
Channel Select
Dolby Speaker Setup
Start
Front panel
Display
Playback
4
5
Speaker Preset 1
218
Rear panel
Settings
Tips
Select "Start", then press ENTER.
Audyssey
®
Setup can also make the following settings.
Speaker Layout
0
Set the Speaker Layout to suit your speaker environment.
Channel Select
0
If "Amp Assign" is set to "9.1ch + Front B", select the Front
speakers to be measured.
Dolby Speaker Setup
0
Set the distance between the Dolby Atmos Enabled speaker and
the ceiling.
This can be set when using the Front Dolby Atmos Enabled,
Surround Dolby Atmos Enabled or Back Dolby Atmos Enabled
speaker.
Follow the instructions on the screen display and press
"Next" to proceed further.
Remote
Index
Appendix
Advertisement
