Advertisement
Contents
Connections
Changing the strength of Tactile
Transducer according to the input
source (Tactile Transducer)
Adjusts the volume of the tactile transducer output.
1
Press OPTION.
An option menu screen is displayed.
When the input source is "HEOS Music", an option menu for
0
online music is displayed. Select "AVR Options...", then press
ENTER.
2
Use cursor Up/Down to select "Tactile Transducer",
then press ENTER.
The "Tactile Transducer" screen is displayed.
3
Use cursor Left/Right to set the tactile transducer
function to on/off.
On
(Default):
Off:
Front panel
Display
Playback
Enable tactile Transducer.
Disable tactile Transducer.
Rear panel
Settings
4
If you selected "On" in step 3, press cursor Down and
adjust the "Level".
5
Use cursor Left/Right to adjust the tone, then press
ENTER.
-12.0 dB – +12.0 dB (Default : 0.0 dB)
0 "Tactile Transducer" settings are stored for each input source.
0 This cannot be set when the "Speakers" - "Manual Setup" - "Advanced" - "Tactile
Transducer" - "Tactile Transducer" is set to "Disabled".
137
Remote
Tips
Appendix
Index
Advertisement
