Advertisement
Contents
Connections
Trigger Out 1 / Trigger Out 2 / Trigger
Out 3
Select the conditions for activating trigger out.
For details about how to connect the TRIGGER OUT jacks, see
"TRIGGER OUT jacks" (v p. 87).
n When setting for zone (MAIN ZONE / ZONE2 /
ZONE3)
Trigger out is activated through linkage to the power of the zone set to
"On".
n When setting for input source
Activate trigger out when the input source set to "On" is selected.
n When setting for HDMI Out
Activate trigger out when the HDMI Out set to "On" is selected.
On:
Activate trigger on this mode.
Off:
Do not activate trigger on this mode.
Front panel
Display
Playback
Settings
Front Display
Makes settings related to the display on this unit.
o Brightness
Adjust the display brightness of this unit.
Bright
(Default):
Dim:
Dark:
Off:
0 You can also adjust the display by pressing DIMMER on the main unit.
o Channel Indicator
Sets whether to use the input signal display or output signal display for
the channel indication on the display.
Input:
Output
(Default):
271
Rear panel
Tips
Normal display brightness.
Reduced display brightness.
Very low display brightness.
Turns the display off.
Uses the input signal display for the
channel indication on the display.
Uses the output signal display for the
channel indication on the display.
Remote
Index
Appendix
Advertisement
