Advertisement
Contents
Connections
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
®
Setup.
If you enable new speakers in the speaker configuration menu after
0
performing Audyssey
®
Setup, you will no longer be able to select
Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
Dynamic Volume
®
. (v p. 195)
Changing the following settings:
0
Distances / Levels / Crossovers settings will not disable Audyssey
require running Audyssey
®
Setup again.
"Manual Setup" can be used without changing the settings. Please set if
0
necessary.
Front panel
Display
Playback
Settings
Speaker Layout
Select a suitable speaker layout for your speaker system.
o Amp Assign
Select the power amplifier usage method to match your speaker
®
or Audyssey
system.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Amp
®
or
Assign configure the corresponding detailed settings.
13.1ch:
11.1ch:
9.1ch + ZONE2
(Default):
226
Rear panel
Tips
Setting to use the 11-channel power
0
amplifier in this unit and an external
power amplifier connected to PRE OUT
to play back up to 13.1-channels.
You can connect speakers for up to 11.1-
0
channels for MAIN ZONE.
Settings to assign all power amplifier
0
within this unit to MAIN ZONE to play
back up to 11.1-channels.
Setting to assign the power amplifiers in
0
this unit for ZONE2 to 2-channels.
You can connect speakers for up to 9.1-
0
channels for MAIN ZONE.
Remote
Index
Appendix
Advertisement
