Advertisement
Contents
Connections
o DTS Neural:X
DTS Neural:X Expands the non-object based audio signals and
optimizes them for your speaker configuration.
On
(Default):
Off:
0 You can set this when sound mode is "DTS:X".
o IMAX
Sets the audio mode for IMAX playback.
Auto
(Default):
Off:
0 This setting cannot be set when headphones are used.
Front panel
Display
Playback
Use "DTS Neural:X".
Do not use "DTS Neural:X".
Automatically enables IMAX mode when
IMAX content is detected.
Disables IMAX mode.
Rear panel
Settings
o IMAX Audio Settings
You can configure special IMAX audio settings to recreate the
conditions of an IMAX theater.
Auto
(Default):
Manual:
0 You can set this when sound mode is "IMAX DTS" or "IMAX DTS:X".
0 "Speakers" - "Crossovers", "Bass" - "Subwoofer Output" and "LPF for LFE" in
the menu cannot be applied during IMAX playback.
o High Pass Filter
Set the high pass filter cutoff frequency for all speakers during IMAX
playback.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
180 Hz / 200 Hz / 250 Hz (Default: 80 Hz)
0 You can set this when "IMAX Audio Settings" is set to "Manual".
188
Remote
Tips
Appendix
Applies the optimized speaker settings to
reproduce similar to the IMAX theater
environment.
Manually adjusts the "High Pass Filter",
"Low Pass Filter" and "Subwoofer
Output".
Index
Advertisement
