Advertisement
Contents
Connections
No sound comes out of a specific speaker.
Check that speaker cables are properly connected.
0
Check that a selection other than "No" is set for the "Speaker Layout" setting in menu. (v p. 226)
0
Check the "Amp Assign" setting in the menu. (v p. 226)
0
When the sound mode is "Stereo", audio is only output from the front speakers and subwoofer.
0
Audio is not output from the surround back speaker if "Speaker Virtualizer" is set to "On" when "Speaker Layout" - "Surround Back" is set to "1 spkr" in
0
the menu. (v p. 187)
When "Speaker Layout" - "Surround Back" is set to "2 spkrs", "Speaker Layout" - "Center" is set to "Yes", and sound mode is set to "IMAX DTS",
0
surround audio is output from the surround back speaker. Audio is not output from the surround speaker. (v p. 228)
No sound is produced from subwoofer.
Check the subwoofer connections.
0
Turn on the subwoofer's power.
0
Set "Speaker Layout" - "Subwoofers" in the menu to "1 spkr", "2 spkrs", "3 spkrs" or "4 spkrs". (v p. 235)
0
When "Crossovers" - "Front" in the menu is set to "Full Range", depending on the input signal and the sound mode, no sound may be output from the
0
subwoofer. (v p. 244)
When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the subwoofer. (v p. 246)
0
You can make the subwoofer always output sound by setting the "Subwoofer Output" to "LFE + Main". (v p. 246)
0
DTS sound is not output.
Check that the digital audio output setting on the connected device is set to "DTS".
0
Front panel
Display
Playback
Settings
287
Rear panel
Tips
Remote
Index
Appendix
Advertisement
