Advertisement
Contents
Connections
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
When using Dirac Live, the unit is fixed as "Dirac Live Setup" (v p. 252).
"Distances" values for each filter are stored independently in Dirac Live
Room Correction.
o Unit
Set the unit of distance.
Feet (Default)
Meters
[When using Dirac Live]
msec
o Step
Set the minimum variable width of the distance.
1 ft / 0.1 ft (Default: 1 ft)
0.1 m / 0.01 m
[When using Dirac Live]
1 ms / 0.1 ms
Front panel
Display
Playback
Settings
o Set the distance
0.0 ft – 59.1 ft / 0.00 m – 18.00 m
[When using Dirac Live]
0.0 ms – 20.0 ms
0 The speakers that can be selected differ depending on the "Speaker Layout"
settings. (v p. 226)
0 Default settings:
Front L / Front R / Front Height L / Front Height R / Center / Front Wide L /
Front Wide R / Front Dolby L / Front Dolby R / Subwoofer 1 / Subwoofer 2 /
Subwoofer 3 / Subwoofer 4: 11.8 ft (3.60 m)
Speakers other than the above: 9.8 ft (3.00 m)
0 Set the difference in the distance between the speakers to less than 19.7 ft
(6.00 m).
242
Rear panel
Tips
Remote
Index
Appendix
Advertisement
