thomann ignition 2bright Pint TW200 IP MK II User Manual page 34

Operating
Firmware version display
LED operating hours display
Device operating hours display
2bright Pint TW200 IP MK II
34
LED PAR
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'System Info' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] until the display shows 'Firmware' .
ð The current firmware version is displayed.
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'System Info' .
Confirm with [ENTER].
2. Press [UP] or [DOWN] until the display shows 'LED On Time' .
ð The operation hours of the LED are displayed.
1.
Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'System Info' .
Confirm with [ENTER].
2. Press [UP] or [DOWN] until the display shows 'Total Operation Hours' .
ð The operation hours of the device are displayed.