thomann ignition 2bright Pint TW200 IP MK II User Manual page 23

Setting the DMX mode
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'DMX Mode' .
Confirm with [ENTER].
2.
Use [UP] or [DOWN] to select the desired DMX mode (1, 2, 3, 4, 5 or 8 channels).
Depending on the selected mode, the display shows '1CH' , '2CH A' , '2CH B' '3CH' , '4CH' ,
'5CH' or '8CH' .
3. Press [ENTER] to accept the selection.
This setting is only relevant when the device is controlled via DMX.
Operating
2bright Pint TW200 IP MK II
23
LED PAR