Starting Up - thomann ignition 2bright Pint TW200 IP MK II User Manual

Starting up

5 Starting up
Connections in DMX mode
2bright Pint TW200 IP MK II
18
LED PAR
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the first DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼ W).