Operating
Setting fan mode
2bright Pint TW200 IP MK II
30
LED PAR
1.
Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Fan Mode' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to select the desired fan mode.
The following sub menus are available:
Menu level 3
'Smart'
'Silent'
'Max'
4.
Press [ENTER] to accept the selection.
Function
The fan speed is controlled automatically depending on the
device temperature.
The fan is off (silent mode). The device temperature is controlled
by reducing the power consumption to a maximum of 70 W.
The fan runs at maximum speed.