Installation - thomann ignition 2bright Pint TW200 IP MK II User Manual

4

Installation

Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Secure the barn door with a safety cable on the spotlight after installation. The
safety cable must run outside the barn door and must not interfere with the light
emission.
NOTICE!
Risk of overheating
Always ensure sufficient ventilation.
The ambient temperature must not exceed the limits stated in the chapter Tech‐
nical Specifications of the User Manual.
Installation
2bright Pint TW200 IP MK II
15
LED PAR