thomann ignition 2bright Pint TW200 IP MK II User Manual page 25

Rotating the Display
Setting display illumination
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Display Reverse' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to select either 'On' (display rotated by 180 °) or 'Off' (display not
rotated).
4. Press [ENTER] to accept the selection.
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Display Backlight' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to select either 'On' (display permanently on) or 'oFF' (display turns
off after a few seconds in case of inactivity).
4. Press [ENTER] to accept the selection.
Operating
2bright Pint TW200 IP MK II
25
LED PAR