thomann ignition 2bright Pint TW200 IP MK II User Manual page 32

Operating
Resetting the device to factory
defaults
2bright Pint TW200 IP MK II
32
LED PAR
Menu level 3
'6000Hz'
'10000Hz'
4.
Press [ENTER] to accept the selection.
1.
Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2. Press [UP] or [DOWN] repeatedly until the display shows 'Service' . Confirm with [ENTER].
3. Press [UP] or [DOWN] repeatedly until the display shows 'Reset' . Confirm with [ENTER].
ð You are prompted to enter a password.
4. Enter the password 11.
5.
Press [ENTER].
ð The device is reset to factory default settings.
Function
PWM 6 kHz
PWM 10 kHz