thomann ignition 2bright Pint TW200 IP MK II User Manual page 24

Operating
Manual mode / stand-alone
operation
2bright Pint TW200 IP MK II
24
LED PAR
1.
Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Stand Alone' .
Confirm with [ENTER].
2. Press [UP] or [DOWN] to select the desired submenu or the desired value. The following
sub menus are available:
Menu level 2 Menu level 3
'CTC' 'OFF'
'2700...7000 K'
'Warm White' '0...255'
'Cold White' '0...255'
'Dimmer' '0...255'
'Strobe' '0...30Hz'
'AutoFade' 'No fade'
'0.5s...30s'
3. Press [ENTER] to accept the selection.
Function
"Colour temperature control" function off
Setting the colour temperature
Warm white LED brightness
Cold white LED brightness
Dimmer intensity (0 % to 100 %)
Strobe effect frequency from 0 to 30 Hz
"Automatic fade" function off
Automatic fade in a time from 0.5 s to 30 s. Over‐
writes the dimmer and the strobe effect settings.