Operating
Setting the DMX address
2bright Pint TW200 IP MK II
22
LED PAR
1.
Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'DMX Address' .
Confirm with [ENTER].
2.
Use [UP] or [DOWN] to select the desired DMX address between '001' and '512' .
3.
Press [ENTER] to accept the selection.
This setting is only relevant when the device is controlled via DMX. Make sure that this
number matches the configuration of your DMX controller. The following table shows
the highest possible DMX address for the various DMX modes.
Mode
1-channel
2-channel, variant A
2-channel, variant B
3-channel
4-channel
5-channel
8-channel
Display
Highest possible DMX address
'1CH'
512
'2CH A'
511
'2CH B'
511
'3CH'
510
'4CH'
509
'5CH'
508
'8CH'
505