thomann ignition 2bright Pint TW200 IP MK II User Manual page 33

Calibrating colour temperature
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Service' . Confirm with [ENTER].
3.
Press [UP] or [DOWN] repeatedly until the display shows 'Calibration' . Confirm with
[ENTER].
ð You are prompted to enter a password.
4. Enter the password 50. Confirm with [ENTER].
5.
Use [UP] or [DOWN] to select a value for the calibration of the colour temperature. The
following table shows the available options.
Menu level 4
'Warm'
'Cold'
6.
Press [ENTER] to accept the selection.
Menu level 5 Function
'000...255' Calibrating warm white
'000...255' Calibrating cold white
Operating
2bright Pint TW200 IP MK II
33
LED PAR