thomann ignition 2bright Pint TW200 IP MK II User Manual page 28

Operating
Setting the dimmer speed
2bright Pint TW200 IP MK II
28
LED PAR
Menu level 3
'Stage2'
4.
Press [ENTER] to accept the selection.
The dimmer speed can only be set for the 'Stage2' dimmer curve.
1.
Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Dimmer Speed' . Confirm with
[ENTER].
3. Use [UP] or [DOWN] to select a dimmer speed between 0.1...0.9 seconds and 1...10 sec‐
onds (display shows '0.1-0.9s' ... '1-10s' ).
4. Press [ENTER] to accept the selection.
Function
without fade time: Rise time 0 ms, fall time 1100 ms
Fade time 1 s: Rise time 0 ms, fall time 1660 ms