thomann ignition 2bright Pint TW200 IP MK II User Manual page 17

Mounting options You can install the device in hanging or standing position. When in use, the device must
always be attached to a solid surface or an approved truss. Use the openings of the bracket
provided for mounting.
Always work from a stable platform whenever installing, moving or servicing the device. In
doing so, the area underneath the device must be cordoned off.
The safety cable must be attached to the bracket.
Please note that this device must not be connected to a dimmer.
Installation
2bright Pint TW200 IP MK II
17
LED PAR