Validation And Liability; General Safety Warning - Omron TM Robot S Series Hardware Installation Manual

hazardous energy or implement energy isolation before any maintenance is performed.
 Dispose of the product in accordance with the relevant rules and regulations of the country or area
where the product is used.

2.6 Validation and Liability

The information contained herein neither includes how to design, install, and operate a complete robotic arm
system, nor involves the peripherals that may affect the safety of the complete system. The integrators of the
robot should understand the safety laws and regulations in their countries and prevent hazards from occurring in
the complete system.
This includes but is not limited to:
 Risk assessment of the whole system
Adding other machines and additional risk reduction measures based on the results of the risk assessment

Using appropriate software safety features

Ensuring Users will not modify any safety measures

 Ensuring all systems are correctly designed and installed
 Clearly labeling user instructions
 Clearly marking the contact information for the integrator
 Making relevant documents accessible, including the risk assessment, and this manual

2.7 General Safety Warning

The noise measured in a factory setting is about 50.4 dB (A) without production. (Measured 1m from the robot
1.
and 1.6m above the floor, at 80% of maximum speed). If the sound pressure is over 80 dB(A) while operating,
wear proper ear protection.
Environmental Conditions:
2.
 Ambient air temperature: 0˚C ~ +50˚C
 Ambient relative humidity: < 85%
 Transportation & Storage condition: -20˚C ~ +60˚C
Transportation & Storage humidity: < 75%

The robot needs to be protected from shock or vibration

Observe ESD precautions when installing or removing robot

Omron TM Collaborative Robot S Series: TM5S and TM7S Hardware Installation Manual
CAUTION:
This product is a partly complete machine. The design and installation of the complete
system must comply with the safety standards and regulations in the country of use.
Users and integrators of the robot should understand the safety laws and regulations in
their countries and prevent major hazards from occurring in the complete system.
14