Validation And Liability; Limitation Of Liability; Functional Note Symbols - Omron TM Conveyor Tracking User Manual

1.5 Validation and Liability

The information contained herein neither includes how to design, install, and operate a complete robotic
arm system, nor involves the peripherals which may affect the safety of the complete system. The
integrators of the robot should understand the safety laws and regulations in their countries and prevent
hazards from occurring in the complete system.
This includes but is not limited to:
Risk assessment of the whole system

Adding other machines and additional risk reduction measures based on the results of the risk

assessment
Using appropriate software safety features

Ensuring the user will not modify any safety measures

Ensuring all systems are correctly designed and installed

Clearly labeling user instructions

Clearly marked symbols for installation of the robot arm and the integrator contact details

Making accessible relevant documents, including the risk assessment and this Manual

CAUTION:
This product is a partly complete machine. The design and installation of the complete system
must comply with the safety standards and regulations in the country of use. The user and
integrators of the robot should understand the safety laws and regulations in their countries
and prevent major hazards from occurring in the complete system.

1.6 Limitation of Liability

No safety-related information shall be considered a guarantee by the Corporation that a TM Robot will
not cause personnel injury or property damage.

1.7 Functional Note Symbols

The following table defines the functional note symbols used in this manual. Read the paragraphs
carefully.
IMPORTANT:
This symbol indicates the relevant functional details to assist programming and use.
NOTE:
This symbol indicates the relevant functional use tips to assist programming efficiency.
TM Conveyor Tracking Software version: TMflow 1.76 9