Advertisement
Introduction
Warranty Repairs
This manual provides the technical service information necessary to maintain
satisfactory operation of the Bard CritiCore Monitor.
It is intended for use by
qualified personnel who are familiar with electro-mechanical devices, and in
particular, microprocessor-controlled patient monitors.
Use this manual in
conjunction with the Bard CrítiCore Monitor Operator's Manual.
The contents of this manual are summarized below.
1.
Product Description—Description ot Bard CritiCore Monitor functions,
specifications, and product information.
2.
Functional Checkout—Use this test procedure to verify correct
* operation of the Monitor.
If the Monitor fails any test within the checkout,
the CBET will be referred to the necessary sections of this manual for
turther testing.
After repair is made (by either Bard or the CBET), use
the Functional Checkout procedure to verify correct operation before
returning the Bard CritiCore Monitor for general use.
3.
Troubleshooting Information—For monitors with an obvious or
predetermined failure, use this guide to identify the necessary tests to
isolate the problem.
4.
Mechanical Testing and Repair Procedures—Use these procedures
to test, disassemble and reassemble the Monitor.
After repair is made
(by either Bard or the CBET), use the Functional Checkout procedure to
verify correct operation before returning the Bard CritiCore Monitor for
general use,
5.
Electronic Testing and Calibration Procedures—Use these
procedures to test and calibrate the electronics of the Monitor. After
repair is made, use the Functional Checkout procedure to verify correct
operation before returning the Bard CritiCore Monitor for general use.
6.
Replacement Parts Kit List—Listing of available Bard replacement
parts.
Note:
The Bard CritiCore Monitor contains many custom mechanical
and electronic components.
To ensure safe and proper
operation of the Monitor, use only Bard replacement parts as
specified in the replacement parts kit list.
7.
Product Specifications—Measurement ranges and limits along with
instrument specifications.
8.
Schematics—Schematic diagrams for the CritiCore Monitor.
Includes
control block diagrams and timing charts.
・
Bard provides a 90-day limited warranty on each Bard CritiCore Monitor. All
repairs on products under warranty must be performed at a Bard designated
repair facility. If there is any evidence of unauthorized service the customer
may forfeit any warranty provisions and may be billed for the repairs required
to return the Monitor to its original condition.
To obtain technical support, product information, and for placing orders
contact Bard Customer Service at 1-800-526-4455.
Bard CritiCore Monitor Service Manual
Page 2
Advertisement
