Download Print this page

Bard CritiCore 000002 Service Manual page 44

Advertisement

3.
Install the rear enclosure per the Installing the Rear Enclosure procedure
on page 40.
install the hooks per the Installing the Hooks procedure on page 36.
Perform the entire Functional Checkout procedure (on page 7) to ensure
that all display and general Monitor functions are working properly.
Attraction Plates and Magnets
If an attraction plate becomes detached, and the front enclosure is not
damaged, the plate may be replaced.
If a magnet has become dislodged,
and the bezel enclosure is not damaged, the magnet may be replaced.
Replacing an Attraction
Equipment Required
Plate
ο ν
small chisel or hobby knite
* . Loctite 454 Adhesive (or equivalent)
Procedure
1.
Remove any remaining adhesive residue in the attraction plate recess on
the front enclosure.
This can be done with a small chisel or hobby knife.
Try a dry fit with the replacement attraction plate to ensure that the plate
sits flush in the recess.
2.
Place a small amount of Loctite 454 into the attraction plate recess.
Immediately place the replacement attraction plate into place (adhere to
either side of the plate). Be sure to wipe away excess adhesive which
may have squeezed onto the top side of the plate.
precautions as specified by the manufacturer for the safe
Caution:
Loctite 454 contains cyanoacrylate.
Observe all necessary
handling of this adhesive.
Allow the bond to dry as specified by the manufacturer.
Without a container in the Monitor, completely close the display so that
the magnets make contact with the attraction plates.
Lift up on the
display to verify that the attraction plate is still. bonded to ihe.front
enclosure.
O P BEE
AS ES
Replacing a Magnet
Equipment Required
+
Small chisel or hobby knife
*
Loctite 454 Adhesive (or equivalent)
Procedure
1.
Remove any remaining adhesive residue in the magnet recess:on the
bezel enclosure. This can be done with a small chisel or hobby knife:
Try a dry fit with the replacement magnet to ensure that the. magnet sits
flush in the recess.
:
Page 38
Bard CritiCore Monitor Service Manual

Advertisement

loading

Related Products for Bard CritiCore 000002