Download Print this page

Bard CritiCore 000002 Service Manual page 40

Advertisement

5.
If the arm must be replaced, the hooks need to be removed. Separate
the hook caps by inserting a small flat head jewelers screwdriver
between each hook cap and the arm as illustrated in Figure 46.
6.
Using a small jeweler's screwdriver or wire, push the dowel pin out of the
arm insert and remove the hook as illustrated in Figure 47.
Figure 47
Figure 46
Installing the Arms
Equipment Required
Standard screwdriver
*
3/8" socket and driver
Note:
Do not pre-lubricate the bearing in a replacement arm received
from Bard.
Procedure
1.
If the handle was removed prior to arm installation, ensure that the,
handle has been attached in the proper orientation (see the note in the
installing the Handle procedure on page 35).
2.
Replace the shoulder screw, tightening the screw to 15in/Ibs. of torque.
Replace the arm cap.
-
Note:
Ensure that the hook fs installed with the proper orientation.
With the Monitor facing you and.the arms hanging down, the
hook(s)- openings should face towards the front of the Monitor
{see left Monitor in Figure 42).
É
3.
Reattach the hook to the arm by inserting the dowel pin through the hook
and arm insert. Secure the dowel pin by replacing the hook caps onto
the arm.
4.
Perform the Testing the Arms procedure (page 32) to verify that the arms
move freely.
Handle
The Bard CritiCore Monitor handle allows.the Monitor to be easily
transported.
The handle also keeps the Monitor pushed away from an.object
when the Monitor is hung by the hooks.
It is necessary to keep the Monitor
away from any objects so as to allow the Monitor to hang freely on a level
plane. The handlé raises when the arm(s) are raised. The handle is
attached to the arm, which is attached to the front enclosure.
Figure 48
Testing the Handle
Procedure
1.
Visually Inspect the handle, if the handle is cracked or broken, the
handle must be replaced.
2.
Each handle contains a molded, plastic step which catches on a molded
plastic step on the arm. This causes the handle to raise as the arm is
raised.
n
Page 34
Bard CritiCore Monitor Service Manual

Advertisement

loading

Related Products for Bard CritiCore 000002