Border Erase/Full Scan - Kyocera TASKalfa 6053ci Hardware Installation And Reference Manual

Sending Faxes > Border Erase/Full Scan

Border Erase/Full Scan

Erases the black border that forms around the image. The following modes are available.
Item
Standard
Full Scan
Border Erase Border
Sheet
Back Page
Border Erase Border
Book
Gutter
Back Page
Individual Border Top
Erase
Bottom
Left
Right
Back Page
Original
Orientation
*1 The input units can be changed in System Menu.
Machine's Operation Guide
Value
Read the source document with Standard Mode. (Border Erase Width: 2 mm)
Scan without erasing borders around the original.
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not
Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not
Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not
Erase
Top Edge on Top, Top Edge on
Left
3-25
Description
Set the border erase width.
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Set the border erase width.
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Set the border erase width.
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
Then select [OK].
*1
*1
*1