Kyocera TASKalfa 6053ci Hardware Installation And Reference Manual page 194

Fax Settings > Default fax settings
Function Defaults
[System Menu/Counter] key > [Common Settings] > [Function Defaults]
Item
FAX TX Resolution
*1
i-FAX Subject/Body
Continuous Scan (FAX)
*1 This function is displayed when the optional Internet FAX Kit is installed.
Display Status/Log
[System Menu/Counter] key > [Common Settings] > [Display Status/Log]
Item
Display FAX Log
Function Key Assignment
[System Menu/Counter] key > [Common Settings] > [Function Key Assignment]
Item
Function Key 1
Function Key 2
Function Key 3
*1 The registered program will be displayed.
*2 The running application will be displayed.
Show Power Off Message
[System Menu/Counter] key > [Common Settings] > [Show Power Off Message]
Item
Show Power Off Message
Select the default scanning resolution.
Value: 600x600dpi, 400×400dpi Ultra Fine, 200×400dpi Super Fine, 200×200dpi
Fine, 200×100dpi Normal
Set the subject and body automatically entered (default subject and body) when
sending the scanned originals by i-FAX.
Value:
Subject: Up to 60 characters can be entered.
Body: Up to 500 characters can be entered.
Set the continuous scan defaults.
Value: Off, On
Set the display method of the Status/Log.
Value: Show All, Hide All
Assign a function to each function key.
Value: None, Copy, Send, FAX Server, FAX, Custom Box, Job Box, USB Drive,
FAX Box, FAX Memory RX Box, Send to Me (E-mail), Send to Me from Box (E-
mail), Internet Browser, ID Card Copy, Program
NOTE
You can select the functions to be displayed for [All], [Application], [Program] and
[Others].
Set the mode whether display a confirmation message in power supply off.
Value: Off, On
Description
Description
Description
Description
8-7
*1 *2
, Application