Kyocera TASKalfa 6053ci Hardware Installation And Reference Manual page 238

Troubleshooting > Error Code List
Error Code
E04200
U04200
E04300
U04300
E04400
U04400
E04500
U04500
E05100
U05100
E05200
U05200
E05300
U05300
E14000
U14000
E14100
U14100
E19000
U19000
E19100
U19100
E19300
U19300
1101
1102
1104
1105
1106
Encrypted transmission was canceled because the specified box is not registered.
Encrypted transmission was canceled because the recipient fax is not equipped with an
encrypted communication function.
Encrypted transmission was canceled because the encryption key does not match.
Encrypted reception was canceled because the encryption key does not match.
Transmission was canceled because communication requirements are not met due to the
transmission restriction set on this machine. Check with the recipient.
Reception was canceled because communication requirements are not met due to the
reception restriction set on this machine.
Reception was rejected by the recipient because communication requirements are not met
due to the reception restriction set on the recipient machine. Check with the recipient.
Reception to the Sub Address Box was stopped because there is no more free space in the
memory of this machine. Create free space by outputting the data stored in the memory, or
cancel the reception to the Sub Address Box.
Transmission to the Sub Address Box or sub address box on our-brand recipient machine
was stopped because there is no more free space in the memory of the recipient machine.
Check with the recipient.
Memory reception was stopped because there is no more free space in the memory of this
machine. Create free space by outputting the data stored in the memory, and ask the sender
to resend.
Transmission was stopped because there is no more free space in the memory of the
recipient machine. Check with the recipient.
Transmission was stopped due to a data error occurring during transmission. Send again.
Failed to send i-FAX.
Check the host name of the SMTP server on the Command Center RX.
Failed to send i-FAX.
Check the following on the Command Center RX.
• SMTP login user name and login password
• POP3 login user name and login password
Failed to send i-FAX.
Check the i-FAX address.
NOTE
If the address is rejected by the domain, you cannot send the E-mail.
Failed to send i-FAX.
Select [On] of the i-FAX settings on the Command Center RX.
Failed to send i-FAX.
Check the sender address of SMTP on the Command Center RX.
Possible Cause/Action
11-8