Kyocera TASKalfa 6053ci Hardware Installation And Reference Manual page 196

Fax Settings > Default fax settings
Transmission
[System Menu/Counter] key > [FAX] > [Transmission]
Item
Basic Local FAX
Name (Port
1)
Local FAX
Name (Port
*1
2)
TTI
Account as Local FAX Name Select whether or not to use account name as local FAX name.
Retry Times
Local FAX Register the local FAX name printed in the transmit terminal identification
Name Entry (TTI) area.
NOTE: If two fax kits are installed and two telephone lines are used,
TTI information can be registered for each line.
Local FAX
Settings specified in Local FAX Name Entry (Port 1) are applied to
Name Entry
Internet fax.
This item is included in the Quick Setup Wizard.
Quick Setup Wizard (page 2-12)
The transmit terminal identification (TTI) is the information about the sending
machine (transmit terminal) that is printed by the receiving machine on the
received fax. The information includes the date and time of transmission,
number of pages sent, name and fax number. This machine enables the user
to select if the TTI is printed out on the fax on the receiving system.
Regarding the location of the information to be printed, you can select inside
or outside of the page image being sent.
Value: Off, Outside, Inside
NOTE: Normally, the Local FAX Name is printed in the transmit
terminal identification (TTI). However, when job accounting is enabled
and an Account ID is entered when a fax is sent, you can enable a
setting to have the Account Name or Local FAX Name, whichever was
selected, be printed.
This item is included in the Quick Setup Wizard.
Quick Setup Wizard (page 2-12)
Value: Off, On
The number of retry times can be changed.
This item is included in the Quick Setup Wizard.
Quick Setup Wizard (page 2-12)
Description
8-9