Kyocera TASKalfa 6053ci Hardware Installation And Reference Manual page 190

Fax Settings > Default fax settings
NOTE
If user login administration is enabled, you can only change the settings by logging in with administrator privileges or
as a user with privileges to configure this setting.
The factory default login user name and login password are set as shown below.
TASKalfa 2553ci
TASKalfa 3253ci
TASKalfa 3553ci
TASKalfa 4053ci
TASKalfa 5003i/TASKalfa 5053ci
TASKalfa 6003i/TASKalfa 6053ci
If function default settings have been changed, the [Reset] key can be selected in each function screen to
immediately change the settings.
Refer to System Menu Settings on the following page and configure as needed.
Model Name Login User Name Login Password
2500 2500
3200 3200
3500 3500
4000 4000
5000 5000
6000 6000
8-3