Selecting The Operating Mode; Lsb Or Usb Mode; Cw/Cw-R Mode; Fsk/Fsk-R Or Psk/Psk-R Mode - Kenwood TS-990S Instruction Manual

4 BASIC OPERATIONS

SELECTING THE OPERATING MODE

The operating mode can be selected. The transceiver
can be operated in SSB (LSB/USB), CW (CW-R), FSK
(FSK-R), PSK (PSK-R), FM and AM modes.

LSB OR USB MODE

1 Press [LSB/USB].
Each key press toggles the operating
mode between LSB and USB modes.
LSB
CW/CW-R MODE
1 Press [CW/CW-R].
Each key press toggles the operating
mode between CW and CW-R modes.
CW
FSK/FSK-R OR PSK/PSK-R MODE
1 Press [FSK/PSK/REV].
Each key press toggles the operating mode between FSK
and PSK modes. While in each operating mode, press and
hold [FSK/PSK/REV] to reverse the operating mode.
FSK
FSK-R

FM/AM MODE

1 Press [FM/AM]. Each key press toggles the
operating mode between FM and AM modes. While
in FM mode, press and hold [FM/AM] to toggle the
FM mode between FM and FM-N (FM Narrow).
FM
FM-N
4-10

CONFIGURING THE DATA MODE

The DATA mode is the operating mode with which you can
connect external equipment to the transceiver, enabling
communicate in RTTY, PSK31 and other formats.
1 Press one of the mode keys to select FM, AM, or SSB
2 Press [DATA/SEL].
In the LSB mode
In the USB
mode
In the FM mode
In the FMN
mode
In the AM mode
USB
CW-R
PSK
PSK-R
AM
(LSB/USB) mode.
Each key press cycles through the following sequence.
(blank) > D1 > D2 > D3 > (blank)
DATA OFF
LSB
USB
FM
FMN
AM
PRECAUTION
◆ Activating the speech processor while in DATA mode may disrupt
data communications. {page 9-6}
◆ The standby method and muting of the audio not used for
transmission can be configured for each status, DATA OFF, DATA
1, DATA 2, and DATA 3. {page 5-11}
DATA1 DATA2 DATA3
LSB-D1 LSB-D2 LSB-D3
USB-D1 USB-D2 USB-D3
FM-D1 FM-D2 FM-D3
FM-N-D1 FM-N-D2 FM-N-D3
AM-D1 AM-D2 AM-D3
Index Contents