Menu Set-Up; Menu A Access Ooo - Kenwood TM-251A Instruction Manual

MENU SET-UP
MENU DESCRIPTION
Many functions on this transceiver are selected or
configured via software-controlled menus instead of
physical controls on the transceiver.
Once familiar with
the Menu system, you will appreciate the versatility it
offers. No longer is the number and complexity of
features restricted by the physical size of transceiver.
The Menus are identified as Menu A and Menu B.
Menu A is used to access functions that are frequently
changed while Menu B is used for less frequently
changed functions.
MENU A ACCESS
Anytime that you want to change a function that is
controlled by Menu A, use the following procedure:
1 Press [F] (1 s) to enter Menu A.
e "MENU" begins blinking and the menu selected last
appears.
2 Select the desired menu function by pressing either
[MR] or [VFO].
22
e Press [VFO] to cycle through functions in a
downward direction on the chart.
e Press [MR] to cycle through functions in an upward
direction on the chart.
e Microphone [MR] or [VFO] may be used if more
convenient.
o
Select the desired menu selection by turning the
Tuning control or by pressing microphone [UP] or
[DWN].
e When selecting from a group of numeric menu
selections, turning the Tuning control clockwise or
pressing microphone [UP] selects in ascending
order, and turning the Tuning control
counterclockwise or pressing microphone [DWN]
selects in descending order.
>
After selecting the desired menu selection, press
[SHIFT] or [TONE/CTCSS] or [REV] or [DTSS] to
exit Menu A.
Note: The Automatic Power Off timer stops counting while you are
in Menu Set-up.