How To Charge The Battery - Fluke 831 User Manual

On-board help
The multipurpose connector [11] is used to charge the device and for connection to a PC.
When connected to a PC, data can be transferred from the device or firmware update can be
performed.

How to charge the battery

Charge the battery before the rugged device is used for the first time or when the device has
not been used for extended periods.
Use only the supplied charger and the related USB C to USB A cable.
Connect the standard USB A end (1) to the supplied USB charger.
l
Plug the USB C end (2) to the rugged device's multipurpose connector.
l
Connect the USB charger to mains supply.
l
After fully charged, disconnect the charger from the rugged device, and then unplug the
l
charger from the mains supply.
The charge capacity is shown by the power icon (1) on the top right corner of the dis-
play.
Shop for Fluke products online at:
MyFlukeStore
www.
1.888.610.7664
.com