Table of Contents
Advertisement
On-board help
(1)
Power key – used to switch the rugged device on.
l
Press and hold down the power key until the device turns on.
(2)
Front camera
l
(3)
Ambient light sensor
l
(4)
Volume down button (refer to Note below)
l
(5)Strap (on either side of the device)
l
(6)Rear camera
l
(7)LED flash
l
(8)Foldable stand – used to hang device from a railing or lay it down in perfect viewing
l
position
(9)Location of Near Field Communication (NFC) antenna
l
(10)Protective bumper
l
(11)USB type C multipurpose connector – used to charge the rugged device or connect
l
the tablet to auxiliary equipment such as a PC
(12)Magnetic strap – used to hang device on any magnetic surfaces
l
Note
The only application that runs on this rugged device is Shaft Alignment. The application
runs in only landscape mode. Additional apps cannot be installed in this dedicated
device.
To capture screenshots on the device, press keys
If the device freezes or is unresponsive, press and hold keys
more than 7 seconds to restart device.
To turn the rugged device, press and hold down the power key [1]. To operate the device, tap
and swipe the touchscreen.
To turn the device off, press and hold down the power key [1]. Two hints appear on the dis-
play.
Shop for Fluke products online at:
1
MyFlukeStore
www.
and
4
simultaneously.
1
and
4
simultaneously for
1.888.610.7664
.com
Advertisement
Table of Contents
