Table of Contents
Advertisement
Vertical results
(1)
Flange correction in 0-6 direction
l
(2)
Flange correction in 3-9 direction
l
(3)
Bolt position
l
(4)
Shimming values
l
(5)
Coupling gap and offset in the 0-6 direction
l
(6)
Coupling gap and offset in the 3-9 direction
l
(7)
Shim correction modes
l
(8)
Shim correction mode used in this example
l
(9)
Initiates Live Move
l
(10)
Tap the coupling results area to open the measurement table screen.
l
In the results screen, the three icons
are active and may be used anytime.
Shimming modes
Shimming modes are defined as follows:
(1)
mode indicates all positive shimming
l
(2)
mode indicates "zero/plus" shimming. In this mode, one bolt position is set to zero
l
and the rest are positive
(3)
mode indicates optimized shimming. In this mode, half of the corrections will pos-
l
itive, and the other half negative.
(4)mode indicates "zero/minus" shimming. In this mode, one bolt position is set to zero
l
and the rest are negative.
(5)
mode indicates all negative shimming
l
Sign convention
POSITIVE GAP opens towards 0:00 or 3:00
POSITIVE OFFSET if the top coupling half is offset towards 0:00 or 3:00
Shop for Fluke products online at:
– dimensions, measurement and results –
MyFlukeStore
www.
On-board help
1.888.610.7664
.com
Advertisement
Table of Contents
